Přeskočit na obsah

Doprava zdarma · 45denní lhůta na vrácení · 12měsíční záruka

← Kávový deník

Cone vs Flat-Bottom Coffee Filters: How to Choose

Compare cone and flat-bottom coffee filters by brewer fit, size codes, bed geometry and what the UC Davis research actually found, then run a practical four-brew test.

Cone vs Flat-Bottom Coffee Filters: How to Choose
In this guide 10 sections
  1. Cone and flat-bottom filters compared
  2. What the research does—and does not—show
  3. Drip coffee maker: cone or basket?
  4. Run this filter-fit check before buying
  5. When a cone setup makes more sense
  6. A four-brew comparison that gives both shapes a fair chance
  7. Common mistakes
  8. Three filter setups to shortlist by brewer shape
  9. The practical choice
  10. Related brewing guides

Pick a coffee filter by your brewer first, not by a promised flavor. A cone paper belongs in a cone dripper or cone-style brew basket; a pleated flat-bottom paper needs a basket that supports both its base and its walls. Once the fit is right, the shape of the basket does change how the bed forms, how fast it drains and how the recipe reacts to grind and pouring.

Quick answer: A cone builds a deeper bed that narrows toward one outlet. A flat-bottom basket spreads the same dose across a wider, shallower bed. Neither shape is better for everyone. In the best-known lab test, the cone brewed a stronger cup at the same recipe, and tasters split on which they preferred. Buy the paper your brewer was designed for, then dial in that brewer rather than forcing one filter shape into the other.

Cone and flat-bottom filters compared

Decision Cone filter Flat-bottom filter
Bed shape Deeper, narrowing toward the outlet Wider and shallower across a flat base
Paper shape Tapered paper with a seam, sized to the cone angle Round flat base with pleated (fluted) walls
Common size codes #1, #2, #4, #6; 60° cones in 01/02/03 No. 155 and No. 185; 8–12 cup "basket" filters for drip machines
Fit risk Wrong angle or size folds, gaps or blocks the outlet Wrong base diameter or wall height collapses or overflows
Starting grind Medium-fine to medium, then adjust Medium, then adjust for flow and taste
Same recipe, UC Davis test Higher dissolved solids (a stronger cup) Lower dissolved solids (a lighter cup)
Best reason to choose it You own a cone brewer and can buy its papers locally You own a basket brewer and can buy its papers locally

Treat these as starting points, not flavor rules. Hole count, ribs, paper thickness, dose, roast, grind and pour pattern all move the cup. Two flat-bottom brewers can drain quite differently, and so can two cones.

What the research does—and does not—show

The study most often quoted on this question comes from the UC Davis Coffee Center (Frost, Ristenpart and Guinard, 2019). The team brewed a light and a dark roast at three grind sizes through a semi-conical basket and a flat-bottom basket, using the same drip system and brewing settings for both. Three findings are worth knowing:

  • Tasters could tell the shapes apart. In blind triangle tests at medium grind, 25 of 45 untrained tasters picked out the odd cup—well above the one-in-three chance rate.
  • The cone brewed stronger. At the same grind, the semi-conical basket produced significantly higher total dissolved solids (TDS). A trained panel described the light-roast cone cups as more citrus, berry and sour, and the flat-bottom cups as more dried fruit, sweet and floral. With the dark roast, the cone cups were noticeably more bitter.
  • No shape won with consumers. Tasters fell into four preference groups. Some disliked the dark-roast brews; others rejected cups that were too sour or citrusy. There was no shared favorite.

Keep the limits in mind. The brews were not matched for strength, so part of what tasters noticed may be a stronger versus weaker cup rather than shape alone; the authors themselves suggest diluting to equal TDS in future work. The test also used one lab brewer, not the dripper on your counter. The practical takeaway: when you switch shapes, expect to re-adjust the grind, and treat broad claims like "cones are brighter" as ideas to test at home, not reasons to buy.

Drip coffee maker: cone or basket?

If you are buying filters for an automatic drip coffee maker, the machine decides for you. Pull out the brew basket and look at the bottom:

  • Flat, round floor with straight sides: it takes fluted basket filters, usually sold as "8–12 cup basket" papers.
  • V-shaped or wedge-shaped floor: it takes cone papers. Most 8–12 cup cone machines use #4; many smaller 2–6 cup machines use #2.

The owner's manual or the label inside the basket usually names the size. A #2 paper in a #4 basket sits too low and can let grounds bypass the paper; a #4 in a #2 basket bunches over the rim. A basket paper squeezed into a cone machine is the most common cause of overflow. If a drip machine is your only brewer, stop here and buy the matching paper—the rest of this guide is for manual pour-over.

Run this filter-fit check before buying

  1. Name the brewer. Write down the brand, model, stated filter format and batch size.
  2. Check the base shape. A round flat base and a pointed cone are not interchangeable.
  3. Check the size code or dimensions. "#2," "02" and "155" describe three different systems. A 60° cone paper and a Melitta-style wedge paper can both be called cones and still fit each other's brewers badly.
  4. Check the wall height. The paper should sit just below the rim and stay supported when wet.
  5. Check the outlet. The paper must not bunch into or seal the drain holes.
  6. Buy a small pack first. Confirm seating and drainage before you stock up.

Yozcoffee's flat-bottom basket filters come 200 to a pack for compatible basket-style brewers and hold up to 50 g of ground coffee. They are not cone papers. The 300 ml portable pour-over set specifies No. 155 flat-bottom papers and ships with ten, so you already know the replacement format.

When a cone setup makes more sense

Go with a cone when your dripper was built for it and the right paper is easy to find where you live. The 400 ml glass pour-over set uses a fitted cone paper in a ribbed glass dripper (about 10 cm across the top); papers are sold separately. The 450 ml ceramic pour-over set also takes a cone paper, but the listing does not confirm a branded size—its opening measures about 11 cm, so check a paper against that rather than ordering by server capacity.

A cone brewer is a poor buy if you already have a big supply of basket papers you want to use up. It may also frustrate travelers who can't count on finding its paper at their destination. In those cases a known flat-bottom size, or a reusable metal filter, is simpler. To compare more brewer shapes side by side, browse pour-over coffee makers and drippers.

A four-brew comparison that gives both shapes a fair chance

If you can borrow one brewer of each shape, skip the one-cup verdict. Each needs a quick dial-in before the comparison means anything. Weigh coffee and water on a coffee scale and keep the water at the same temperature for every brew—195–205°F (90–96°C) is a sensible range.

  1. Brew one: cone baseline. Use the coffee, water and ratio you plan to use for the flat brewer. Note the grind setting, pour pattern and total drain time.
  2. Brew two: flat-bottom baseline. Keep dose, water and temperature identical. Use that brewer's own paper and an even, centered-then-spiral pour that keeps the wide bed level.
  3. Brew three: fix the weaker cup. Change only the grind, by one small step. Don't chase the other brewer's drain time—the geometry is different.
  4. Brew four: repeat the better recipe. A repeat tells you more than a lucky first cup. Taste both at similar temperatures and note clarity, body, sweetness, acidity and finish without forcing a winner. If one cup simply tastes stronger, that may be the extraction difference the UC Davis team measured rather than a flavor the shape "adds."

Use the coffee grind size chart only as a starting range, then let flow and taste guide the next adjustment. The 20 g pour-over recipe gives you a repeatable dose, bloom and pouring plan for both brewers.

Common mistakes

  • Folding a basket paper into a cone: the creases and gaps reroute water and can block the outlet.
  • Buying by carafe size: a 400 ml server tells you nothing about the paper's angle or diameter.
  • Mixing up size systems: #2, 02 and 155 are three different filters from three different sizing systems, even though all three are sold for small batches.
  • Changing grind and pouring at once: you won't know which change helped.
  • Treating equal drain times as equal extraction: bed depth and outlet design differ between shapes.
  • Calling one shape easier for everyone: familiarity, paper supply and your recipe matter as much as geometry.

Three filter setups to shortlist by brewer shape

Buy the paper that matches the brewer; these cover flat-bottom papers, a flat-bottom travel set and a cone brewer.

Yozcoffee white cake-shaped flat-bottom coffee filters, 200 count pack, on a white background

Best for basket-style brewers

Flat-Bottom Basket Coffee Filters – 200 Count

Pleated white papers for compatible flat-bottom and basket-style brewers, up to 50 g of coffee each. These are not cone papers; check your brewer's dimensions.

View the filters
Yozcoffee black portable pour-over coffee set with 300 ml cup, folding dripper, coffee canister, filters and carry case

Best flat-bottom travel setup

Portable Pour-Over Set – 300ml Cup

A collapsible silicone dripper that takes No. 155 flat-bottom papers, with 10 included, plus a 300 ml steel cup, canister and zip case.

View both colors
Yozcoffee clear glass pour-over set with ribbed dripper and 400 ml handled server on white

Best cone setup

Glass Pour-Over Set – 400ml Carafe

Ribbed glass cone dripper, 10 cm across the top, on a 400 ml borosilicate carafe. Fitted cone paper filters are required and sold separately.

View the set

The practical choice

Start with fit, local paper supply and the batch size you actually brew. Choose a cone if a supported cone dripper or cone-basket machine suits your routine. Choose flat-bottom if you prefer that brewer, want a common size such as No. 155, or already own a compatible basket. Then dial in the system you picked on its own terms.

Product specifications checked September 23, 2026. Research references: Frost, Ristenpart and Guinard, "Effect of Basket Geometry on the Sensory Quality and Consumer Acceptance of Drip Brewed Coffee," Journal of Food Science (2019); "Flat vs. Cone: Basket Shape Is as Important as Grind Size in Drip Brew Coffee," SCA 25 Magazine, Issue 8. The cover image is AI-generated editorial photography, not a product photo or a controlled experiment.

About the author

Yozcoffee Editorial Team

Coffee equipment and brewing editors

The Yozcoffee editorial team researches coffee equipment and turns product details and established brewing practices into practical guides for coffee drinkers.

Yozcoffee prodává některé vybavení uvedené v těchto průvodcích. Doporučení produktů jsou součástí redakčního obsahu našeho obchodu.

Jak číst naše průvodce

Helpful answers

Questions related to this guide

Use these follow-up answers to clarify coffee choices, brewing techniques, and next steps.

Is a cone or flat-bottom coffee filter better?
Neither shape is better overall. Use the filter your brewer was designed for, because a mismatched paper causes more problems than shape can fix. If you are choosing a new brewer, pick the shape whose papers you can buy easily, then dial in the grind for that brewer.
Can I use a cone filter in a flat-bottom brewer?
Not reliably. A cone paper leaves gaps against a flat basket floor and walls, so water can bypass the coffee or the paper can collapse. Use the flat-bottom or basket paper your brewer specifies.
Can I use a flat-bottom filter in a cone dripper?
No. A flat-bottom paper cannot seat against a cone's angled walls, so it bunches, leaves gaps and can block the outlet. Use a cone paper sized to the dripper's angle and opening.
What filter does an 8–12 cup drip coffee maker use?
Check the brew basket. A flat, round floor takes 8–12 cup basket filters; a V- or wedge-shaped floor usually takes #4 cone filters. Smaller 2–6 cup cone machines often use #2. The manual or basket label confirms the size.
Are No. 155 and No. 185 flat-bottom filters interchangeable?
No. No. 155 is the smaller size for roughly one to two cups, and No. 185 is the larger size. A 185 paper rises above a small basket, and a 155 paper sits too low in a large one.
Does filter shape change how coffee tastes?
It can. In a 2019 UC Davis study, a semi-conical basket brewed stronger coffee (higher dissolved solids) than a flat-bottom basket at the same recipe, and tasters could tell the cups apart. Consumers still split on which they preferred, so dial in each brewer before comparing.