Single Dose Coffee Bean Tubes – 12-Tube Walnut Display Set

At a Glance

Weigh once, grind later. This set gives you 12 lead-free borosilicate glass tubes, each holding about 20-22 g of whole beans, in a solid walnut base. Pre-weigh a week of single doses, then pour one tube straight into your grinder when it is time to brew.

Each tube lifts out on its own and closes with a threaded, wood-grain screw cap, so different coffees stay separate and easy to tell apart on your counter.

Key Features

• Sized for one dose: about 20-22 g of whole beans per tube, enough for a typical espresso or pour-over dose. Actual fill depends on bean size and roast.
• 12 separate portions: keep several coffees, or a full week of doses, without opening one large bag each time.
• Lead-free borosilicate glass: clear walls show the beans and the fill level at a glance.
• Threaded screw caps: brown wood-grain ABS caps close snugly on the glass neck.
• Solid walnut base: two rows of six recesses, 2.4 cm (0.9 in) deep, hold every tube upright.
• Grinder-friendly opening: the 3 cm (1.2 in) tube pours cleanly into a hand grinder or single-dose hopper.

How to Use

1. Weigh your dose. Measure the beans for one brew; our coffee scales keep every portion consistent.
2. Fill and close. Pour the beans into a clean, dry tube and screw the cap on firmly.
3. Arrange your coffee. Stand the tubes in the walnut base, grouped by coffee or by day.
4. Pour and grind. Lift out one tube, open it and pour the dose into your grinder.

Freshly roasted beans keep releasing CO₂ for a few days. If you fill tubes right after roasting, open the caps briefly every 1-2 days to let the gas escape.

Specifications

Set configuration

12 removable tubes (large size); one base with two rows of six recesses

Capacity per tube

Approx. 20-22 g whole beans (about 0.7 oz)

Tube size

Approx. 3 cm diameter × 12.4 cm tall (1.2 × 4.9 in)

Base dimensions

Approx. 22.1 × 8.0 × 2.9 cm (8.7 × 3.1 × 1.1 in), L × W × H

Recess depth

Approx. 2.4 cm (0.9 in)

Height with tubes in base

Approx. 12.9 cm (5.1 in)

Materials

Walnut wood base; lead-free borosilicate glass tubes; ABS screw caps with wood-grain finish

Weight

Approx. 640 g (1.4 lb) for the full set; base approx. 195 g, each tube with cap approx. 37 g

Dimensions and capacity are approximate. Natural wood grain and tone vary between pieces.

In the Box

• 1 × Walnut wood base with 12 recesses
• 12 × Borosilicate glass tubes
• 12 × Wood-grain ABS screw caps

Coffee beans, grinders, cups and other scene props are not included.

Cleaning & Care

Hand wash the glass tubes and caps with warm water and a mild detergent, then let them dry completely before refilling; leftover moisture affects the beans. Wipe the walnut base with a soft, dry cloth and do not soak it or put it in the dishwasher.

FAQ

Complete Your Coffee Routine

Pair your prepared doses with a grinder from our Coffee Grinders collection for a simple bean-to-cup workflow.